The Hely controller is designed as a compact and simple device used to control and provide the power requirements of an entire heliport lighting system.
The system is fully protected from input transients, output, overload, over-voltage and over-temperature conditions.
Designed and manufactured in Romania.
Light Intensity control can be set at the following brightness levels: 10%, 30% and 100%.
When the lighting system includes a Heliport Beacon, the above intensities will automatically be changed for the beacon. So when the system will run at 10% power, the beacon will run at 3%, at 30% power, the beacon will run at 10% and 100% power is for both the beacon and the other lights(ref. ICAO 220.127.116.11)
Input power range: 110-240Vac
Output voltage: 48Vdc
Output power: 600W (out of which 120W are
reserved for the heliport beacon)
Over-voltage protection 57.6~67.2V
The casing is made of powder coated aluminium.
3 step brightness control
Compatible with TLOF, FATO, AIMING, APPROACH and BEACON
Rated operating temperature from -20 °C up to +60 °C.
The ingress protection rating is IP 65.